Products - Sinetec Technologies
Low resistance or continuity testing -Low resistance or continuity testing
Product Description
MOM2
- ▪ Up to 220 A▪ Battery powered▪ Light weighs only 1 kg▪ Safe test – DualGround™▪ Auto range: 1 μΩ to 1000 mΩ▪ Bluetooth® PC communication▪ Complies with IEEE and IEC standards
DLRO10HD
- • High or low output power selection for condition diagnosis• Rechargeable battery or line power supply, continuous operation, even with dead battery• 10 A for 60 seconds, less time waiting to cool, great for charging inductance• High input protection to 600 V, inadvertent connection to line or UPS voltage will not blow a fuse• Heavy duty case: IP 65 lid closed, IP54 operational (battery operation only)• Rotary switch selects one of five test modes, including auto start on connection, giving ease of use
Megger DLRO10
- • Accurate results in under three seconds • Auto current reversal cancels standing emfs • Fuse protected to 600 V • NiMH battery reduces weight • 250 mW power limit (with optional override) to avoid heating the test sample • Automatically detects continuity in potential and current connections • Visible warning of high voltages present at the terminals • Visible warning of current flowing in the test sample • Multiple operating modes including fully automatic
Megger DLRO10X
- • Accurate results in under three seconds • Auto current reversal cancels standing emfs • Fuse protected to 600 V • NiMH battery reduces weight • 250 mW power limit (with optional override) to avoid heating the test sample • Automatically detects continuity in potential and current connections • Visible warning of high voltages present at the terminals • Visible warning of current flowing in the test sample • Multiple operating modes including fully automatic • Alpha-numeric keypad for entering test notes • User setable high and low limits • Autoranging with Manual option • Printer output and memory
DLRO600
- • Small and weighs less than 33 lbs (15 kg) • Test currents from 10 A to 600 A dc • 0.1 µohms best resolution • On board memory for up to 300 test results and notes • RS232 port to download stored results or for real time output to a printer • Supplied complete with 16.4 ft (5 m) test leads and download software
DLRO200
- • Small and weighs less than 15kg • Test currents from 10 A to 200 A d.c. • 0.1 µΩ best resolution • On board memory for up to 300 test results and notes • RS232 port to download stored results or for real time output to a printer • Supplied complete with 5m test leads and download software
MJOLNER Series
- • Specifically designed for measuring contact resistances in circuit breakers, disconnecting switches, bus-bar joints, and other such devices • Safer testing using the patented DualGround™ technology to test circuit breakers with both sides grounded • Fully automatic testing- microprocessor controlled • Wide measuring range and test currents • High-Power and lightweight
MOM200A
- • Measures contact resistance in circuit breakers, disconnecting switches, busbar connections, safety devices, etc. • Easy to operate • Designed for rugged field use • Highly flexible cable connections • Portable and lightweight, weighs only 14 kg (31 lbs) The MOM200A is designed to check and measure contact resistances in highvoltage circuit breakers, disconnecting switches (isolators) and busbar joints. This unit is an excellent choice when 200 amperes or less are needed for measurement.
MOM600A
- • Compact and tough • Straight forward to use • 600 A output current
BT51
- • High test current • Four terminal measurement • Two measuring ranges (2000 mΩ. and 20,00 mΩ.)and maximum resolution of 0,01 mΩ. • Protected against inadvertent connection to the mains supply
DLRO test leads
- • 12 different options for you to choose • Designed to do the job you want • Range of leads to test wind turbine blades
PowerDB
- The Megger PowerDB is a powerful software package providing data management for each of your acceptance and maintenance testing jobs. Customer and contract information is quickly sorted and searched. Opening a specific record shows detailed information about the job, such as type of service, order date, sales contact, and invoice information. Job information and related test results can be transferred between field-use databases and a master database. Job and Device Productivity Reports track the time spent testing, which aids in bidding future jobs as well as personnel evaluation.
BITE Receiver
- • Used with the original BITE • Provides data storage capabilities • Measures impedance and dc voltage for lead-acid and nickel-cadmium cells The BITE Receiver is a direct replacement for the standard receiver supplied with the original BITE. It provides data storage capabilities without having to replace the BITE transmitter.