Products - Sinetec Technologies
Keysight Technologies -Network Analyzers
Product Network Analyzer Series Frequency Range Maximum Output Power at 10 GHz / Harmonics at 10 GHz Description
N9918A FieldFox Handheld Microwave Combination Analyzer, 26.5 GHz
FieldFox Combo 30 kHz to 26.5 GHz (VNA mode) -3.5 dBm Harmonics: Not available FieldFox Combination Analyzers, Technical OverviewFieldFox Comparison SummaryFieldFox is equipped to handle routine maintenance, in-depth troubleshooting and anything in between. FieldFox delivers Agilent-quality measurements wherever you need to go. Add FieldFox to your kit, and carry precision with you.The microwave combination analyzer's base function is a cable and antenna analyzer and it can be configured to include a spectrum and network analyzer. FieldFox can be ordered with additional capabilities: power meter, independent signal generator, vector voltmeter, interference analyzer, variable DC source, built-in GPS receiver and remote control using an iPad or iPhone.The following accessories are included with every FieldFox: AC/DC adapter, battery, soft carrying case, LAN cable, Quick Reference Guide and User’s Guide.
N5232A PNA-L Microwave Network Analyze
PNA-L 300 kHz to 20 GHz +10 dBm / -20 dBc Agilents N5232A PNA-L microwave vector network analyzer (VNA) offers design and manufacturing engineers the highest-performance mid-range VNA. PNA-L is the world’s best value for microwave manufacturing with accurate S-parameters at a budget-friendly cost along with future-proof capabilities. The PNA-L family is designed for passive components and simple active device measurements of amplifier and frequency converters. Agilents PNA-L VNAs are available in five frequency models. Three frequency models, start at 300 kHz, with two or four ports available for the 13.5- and 20GHz models, and two ports available for the 8.5-GHz product. The other two frequency models with two ports, start at 10 MHz, and include the 43.5- and 50-GHz products. The N523xA PNA-L VNA replaces and is 100% compatible with the existing N5230C, which means there is no change to your setup or test codes.
E5061B ENA Series Network Analyzer
ENA 6 Series 100 kHz to 1.5, 3 GHz +10 dBm at 1 GHz / -25 dBc The E5061B-3L5 LF-RF NA option offers versatile network analysis in the broad frequency range from 5 Hz to 3 GHz. Comprehensive LF network measurement capabilities including built-in 1 MΩ inputs have been seamlessly integrated with the high-performance RF network analyzer. The E5061B-3L5 is the right solution for component and circuit evaluations in the R&D environment.
E5063A ENA Series Network Analyzer
ENA 6 Series 100 kHz to 4.5, 8.5, 18 GHz 0 dBm at 1 GHz, - 5 dBm @ 10 GHz / n/a The E5063A is a low cost network analyzer providing optimized performance and functionality for testing simple passive components such as antennas, cables, filters, and PCBs. The E5063A provides the best balance between price and performance to satisfy your business and technical requirements. It leverages the consistent measurement framework of the industry standard ENA Series to boost efficiency and productivity, and is future proof and ready to evolve as the technologies change.
N9928A FieldFox Handheld Microwave Vector Network Analyzer, 26.5 GHz
FieldFox VNA 30 kHz to 26.5 GHz 3.5 dBm Harmonics: Not available FieldFox Microwave Vector Network Analyzers, Technical Overview FieldFox Comparison Summary FieldFox is equipped to handle routine maintenance, in-depth troubleshooting and anything in between. FieldFox delivers Agilent-quality measurements wherever you need to go. Add FieldFox to your kit, and carry precision with you. The VNAs base function is a transmission/reflection analyzer (S11, S21), and it can be configured to include full 2-port S-parameters. FieldFox can be ordered with additional capabilities: cable and antenna analyzer, built-in power meter, vector voltmeter, variable DC source, built-in GPS receiver, and remote control using an iPad or iPhone. The following accessories are included with every FieldFox: AC/DC adapter, battery, soft
N5234A PNA-L Microwave Network Analyzer
PNA-L 10 MHz to 43.5 GHz 0 dBm / -30 dBc Agilents N5234A PNA-L microwave vector network analyzer (VNA) offers design and manufacturing engineers the highest-performance mid-range VNA. PNA-L is the worlds best value for microwave manufacturing with accurate S-parameters at a budget-friendly cost along with future-proof capabilities. The PNA-L family is designed for passive components and simple active device measurements of amplifier and frequency converters. Agilents PNA-L VNAs are available in five frequency models. Three frequency models, start at 300 kHz, with two or four ports available for the 13.5- and 20-GHz models, and two ports available for the 8.5-GHz product. The other two frequency models with two ports, start at 10 MHz, and include the 43.5- and 50-GHz products.
N9938A FieldFox Handheld Microwave Spectrum Analyzer, 26.5 GHz
FieldFox SA 5 kHz to 26.5 GHz (SA mode) TG output power: -3.5 dBm Harmonics: Not available Description FieldFox Microwave Spectrum Analyzers, Technical Overview FieldFox Comparison Summary FieldFox is equipped to handle routine maintenance, in-depth troubleshooting and anything in between. FieldFox delivers Agilent-quality measurements – wherever you need to go. Add FieldFox to your kit, and carry precision with you. The spectrum analyzer’s base function is spectrum analysis, and can be configured to include; full-band tracking generator and preamplifier, interference analyzer, VSWR and reflection measurements, built-in power meter, USB power sensor support, GPS receiver, DC bias voltage source, time gating and remote control capability. The following accessories are included with every FieldFox: AC/DC adapter, battery, soft carrying case, LAN cable, Quick Reference Guide and User’s Guide.
N5235A PNA-L Microwave Network Analyzer
PNA-L 10 MHz to 50 GHz 0 dBm / -30 dBc Agilents N5235A PNA-L microwave vector network analyzer (VNA) offers design and manufacturing engineers the highest-performance mid-range VNA. PNA-L is the worlds best value for microwave manufacturing with accurate S-parameters at a budget-friendly cost along with future-proof capabilities. The PNA-L family is designed for passive components and simple active device measurements of amplifier and frequency converters. Agilents PNA-L VNAs are available in five frequency models. Three frequency models, start at 300 kHz, with two or four ports available for the 13.5- and 20-GHz models, and two ports available for the 8.5-GHz product. The other two frequency models with two ports, start at 10 MHz, and include the 43.5- and 50-GHz products. The N523xA PNA-L VNA replaces and is 100% compatible with the existing N5230C, which means there is no change to your setup or test codes.
N5222A PNA Microwave Network Analyzer
PNA 10 MHz to 26.5 GHz +13 dBm / -19 dBc The PNA Series is the highest-performing microwave network analyzer in the industry for passive and active device test. You can choose from five frequency models, 13.5, 26.5, 43.5, 50, or 67 GHz, and customize your PNA with the just the right level of performance to meet your specific budget and measurement needs. The Agilent PNA is used to test a wide variety of passive and active devices such as filters, duplexers, amplifiers and frequency converters. The high-performance characteristics of the PNA make it an ideal solution for these types of component characterizations as well as millimeter-wave, signal integrity and materials measurements.
E5071C ENA Series Network Analyzer
ENA 7 Series 9 kHz to 4.5, 6.5, 8.5, 14, 20 GHz +10 dBm at 1 GHz, +7 dBm at 10 GHz / -25 dBc The E5071C network analyzer offers the highest RF performance and fastest speed in its class, with a wide frequency range and versatile functions. The E5071C is the ideal solution for manufacturing and R&D engineers evaluating RF components and circuits for frequency range up to 20 GHz. The E5071C has flexible configurations and you can select the number or ports, frequency and bias teas to fit your application. And the E5071C provides upgradability across all of the options at any time without changing serial number, for both software and hardware options. The E5071C network analyzer provides flexibility as you plan for future investments. Frequency Option: 4.5, 6.5, 8.5, 14 and 20 GHz. Port Configuration: 2 or 4 ports, plus flexible multiport configuration of up to 22 ports with E5092A multiport test set
N9915A FieldFox Handheld Microwave Combination Analyzer, 9 GHz
FieldFox Combo 30 kHz to 9 GHz (VNA mode) -1 dBm at 9 GHz Harmonics: Not available FieldFox Combination Analyzers, Technical Overview FieldFox Comparison Summary FieldFox is equipped to handle routine maintenance, in-depth troubleshooting and anything in between. FieldFox delivers Agilent-quality measurements – wherever you need to go. Add FieldFox to your kit, and carry precision with you. The microwave combination analyzers base function is a cable and antenna analyzer and it can be configured to include a spectrum and network analyzer. FieldFox can be ordered with additional capabilities: power meter, independent signal generator, vector voltmeter, interference analyzer, variable DC source, built-in GPS receiver, and remote control using an iPad or iPhone. The following accessories are included with every FieldFox: AC/DC adapter, battery, soft carrying case, LAN cable, Quick Reference Guide and User’s Guide.
N5224A PNA Microwave Network Analyzer
PNA 10 MHz to 43.5 GHz +13 dBm / -19 dBc The PNA Series is the highest-performing microwave network analyzer in the industry for passive and active device test. You can choose from five frequency models, 13.5, 26.5, 43.5, 50, or 67 GHz, and customize your PNA with the just the right level of performance to meet your specific budget and measurement needs.The Agilent PNA is used to test a wide variety of passive and active devices such as filters, duplexers, amplifiers and frequency converters. The high-performance characteristics of the PNA make it an ideal solution for these types of component characterizations as well as millimeter-wave, signal integrity and materials measurements.
E5072A ENA Series Network Analyzer
ENA 7 Series 30 kHz to 4.5, 8.5 GHz +16 dBm at 3 GHz, +10 dBm at 8.5 GHz / -25 dBc at 2 GHz The Agilent E5072A ENA Series Network Analyzer is a new addition to the ENA series providing a more flexible platform with enhanced capabilities to meet your evolving measurement needs for a wide range of applications. The improved performance on the E5072A exceeds what is possible with the current RF network analyzers. The E5072A with a configurable test set provides access to the signal paths between the internal source, receivers, bridges, and the analyzer’s test ports; which improves instrument sensitivity as well as the ability to add components or peripherals for a variety of applications. The E5072A delivers new standards in versatility, speed and accuracy, and is suitable for full performance characterization of passive and active components, such as antennas, high-rejection filters, and high-power amplifiers.
N9925A FieldFox Handheld Microwave Vector Network Analyzer, 9 GHz
FieldFox VNA 30 kHz to 9 GHz -1 dBm at 9 GHz Harmonics: Not available FieldFox Microwave Vector Network Analyzers, Technical Overview FieldFox Comparison Summary FieldFox is equipped to handle routine maintenance, in-depth troubleshooting and anything in between. FieldFox delivers Agilent-quality measurements – wherever you need to go. Add FieldFox to your kit, and carry precision with you. The VNAs base function is a transmission/reflection analyzer (S11, S21), and it can be configured to include full 2-port S-parameters. FieldFox can be ordered with additional capabilities: cable and antenna analyzer, built-in power meter, vector voltmeter, variable DC source, built-in GPS receiver, and remote control using an iPad or iPhone. The following accessories are included with every FieldFox: AC/DC adapter, battery, soft carrying case, LAN cable, Quick Reference Guide and User’s Guide.
N9935A FieldFox Handheld Microwave Spectrum Analyzer, 9 GHz N9935A FieldFox Handheld Microwave Spect
FieldFox VNA 30 kHz to 9 GHz -1 dBm at 9 GHz Harmonics: Not available FieldFox Microwave Vector Network Analyzers, Technical Overview FieldFox Comparison Summary FieldFox is equipped to handle routine maintenance, in-depth troubleshooting and anything in between. FieldFox delivers Agilent-quality measurements – wherever you need to go. Add FieldFox to your kit, and carry precision with you. The VNAs base function is a transmission/reflection analyzer (S11, S21), and it can be configured to include full 2-port S-parameters. FieldFox can be ordered with additional capabilities: cable and antenna analyzer, built-in power meter, vector voltmeter, variable DC source, built-in GPS receiver, and remote control using an iPad or iPhone. The following accessories are included with every FieldFox: AC/DC adapter, battery, soft carrying case, LAN cable, Quick Reference Guide and User’s Guide.
N5225A PNA Microwave Network Analyzer
PNA 10 MHz to 50 GHz 10 MHz to 50 GHz The PNA Series is the highest-performing microwave network analyzer in the industry for passive and active device test. You can choose from five frequency models, 13.5, 26.5, 43.5, 50, or 67 GHz, and customize your PNA with the just the right level of performance to meet your specific budget and measurement needs. The Agilent PNA is used to test a wide variety of passive and active devices such as filters, duplexers, amplifiers and frequency converters. The high-performance characteristics of the PNA make it an ideal solution for these types of component characterizations as well as millimeter-wave, signal integrity and materials measurements. Most accurate S-parameter measurements The PNA Series provides high-power sources and the best linear receivers, giving it the most accurate S-parameter measurements with the widest power range in the market.
N9914A FieldFox Handheld RF Combination Analyzer, 6.5 GHz
FieldFox Combo 30 kHz to 6.5 GHz (VNA mode) 0 dBm at 6.5 GHz Harmonics: Not available FieldFox Combination Analyzers, Technical Overview FieldFox Comparison Summary FieldFox is equipped to handle routine maintenance, in-depth troubleshooting and anything in between. FieldFox delivers Agilent-quality measurements – wherever you need to go. Add FieldFox to your kit, and carry precision with you. The microwave combination analyzer's base function is a cable and antenna analyzer and it can be configured to include a spectrum and network analyzer. FieldFox can be ordered with additional capabilities: power meter, independent signal generator, vector voltmeter, interference analyzer, variable DC source, built-in GPS receiver, and remote control using an iPad or iPhone. The following accessories are included with every FieldFox: AC/DC adapter, battery, soft carrying case, LAN cable, Quick Reference Guide and User’s Guide. Applications
N5227A PNA Microwave Network Analyzer
PNA 10 MHz to 67 GHz +13 dBm / -20 dBc Highest performance network analyzer that meets your budget The PNA Series is the highest-performing microwave network analyzer in the industry for passive and active device test. You can choose from five frequency models, 13.5, 26.5, 43.5, 50, or 67 GHz, and customize your PNA with the just the right level of performance to meet your specific budget and measurement needs. The Agilent PNA is used to test a wide variety of passive and active devices such as filters, duplexers, amplifiers and frequency converters. The high-performance characteristics of the PNA make it an ideal solution for these types of component characterizations as well as millimeter-wave, signal integrity and materials measurements. Most accurate S-parameter measurements The PNA Series provides high-power sources and the best linear receivers, giving it the most accurate S-parameter measurements with the widest power range in the market.
N9913A FieldFox Handheld RF Combination Analyzer, 4 GHz
FieldFox Combo 30 kHz to 4 GHz (VNA mode) 0 dBm at 4 GHz Harmonics: Not available FieldFox Combination Analyzers, Technical Overview FieldFox Comparison Summary FieldFox RF analyzers are designed to withstand your toughest working conditions. To accelerate your work, each operating mode has a task-driven user interface that saves time in the field. Step up to FieldFox – and boost your readiness. The combination analyzer's base function is a cable and antenna analyzer and it can be configured to include a spectrum and network analyzer. FieldFox can be ordered with additional capabilities: power meter, independent signal generator, vector voltmeter, interference analyzer, variable DC source, and built-in GPS receiver. The following accessories are included with every FieldFox: AC/DC adapter, battery, soft carrying case, LAN cable, Quick Reference Guide and User’s Guide.
N5242A PNA-X Microwave Network Analyzer
PNA-X 10 MHz to 26.5 GHz +13 dBm / -60 dBc Worlds widest range of single-connection measurement applications The PNA-X network analyzer is the worlds most integrated and flexible single-connection microwave test engine for measuring active devices such as amplifiers, mixers, and frequency converters. You can choose from five frequency models to meet your specific device test needs: 13.5, 26.5, 43.5, 50, and 67 GHz. The PNA-X provides unrivaled configurability with a built-in second source, combiner, and internal signal-routing switches. Replace racks and stacks Reduce your equipment count by replacing racks and stacks of equipment with the PNA-X.
N5244A PNA-X Microwave Network Analyzer
PNA-X 10 MHz to 43.5 GHz +13 dBm / -60 dBc Worlds widest range of single-connection measurement applications The PNA-X network analyzer is the worlds most integrated and flexible single-connection microwave test engine for measuring active devices such as amplifiers, mixers, and frequency converters. You can choose from five frequency models to meet your specific device test needs: 13.5, 26.5, 43.5, 50, and 67 GHz. The PNA-X provides unrivaled configurability with a built-in second source, combiner, and internal signal-routing switches. Replace racks and stacks Reduce your equipment count by replacing racks and stacks of equipment with the PNA-X. Applications: S-parameters (CW and pulsed) Noise figure Gain compression Intermodulation and harmonic distortion Conversion gain/loss True-differential stimulus Millimeter-wave Nonlinear waveform and X-parameter® characterization Antenna test
N9923A FieldFox Handheld RF Vector Network Analyzer, 4/6 GHz
FieldFox VNA 2 MHz to 4, 6 GHz +6 dBm at 6 GHz Harmonics: Not available Description View FieldFox Customer Support Home View FieldFox RF VNA N9923A Technical Overview Agilents FieldFox RF vector network analyzer is the worlds most accurate handheld VNA. Key features include: Built-in QuickCal technology enables calibration without a cal kit Best measurement stability over time and temperature Industry´s only handheld network analyzer with MIL PRF 28800F Class 2 compliance with no exceptions Time stamp your measurements with GPS latitude/longitude data 4 hour battery life, field replaceable battery A standard FieldFox RF VNA provides T/R measurements, or S11 and S21, with magnitude and phase. Adding Option 122 (full 2-port S-parameters) allows two-port cal and measurement of all 4 S-parameters at the same time. Using FieldFoxs vector voltmeter (VVM), similar to the 8508A, the phase shift and electrical length of a device can be measured. The VVM option also provides ratio measurements of two channels, A/B or B/A. FieldFox´s other application include distance-to-fault and VSWR testing, absolute power measurements, and characterization of 75-ohm cable TV devices. Standard accessories include AC/DC adapter, battery, and soft carrying case. Additional accessories are available under N9910X RF & MW handheld accessories.
N5245A PNA-X Microwave Network Analyzer
PNA-X 10 MHz to 50 GHz +13 dBm / -60 dBc 10 MHz to 50 GHz2- or 4-ports with two built-in sources126 dB system and 129 receiver dynamic range, 32,001 points, 200 channels, 15 MHz IF bandwidthHigh output power (+16 dBm), low harmonics (-60 dBc) and a wide power sweep range (41 dB)Best dynamic accuracy: 0.1 dB compression with +15 dBm input power at the receiverLow noise floor of -111 dBm at 10 Hz IF bandwidth
N9916A FieldFox Handheld Microwave Combination Analyzer, 14 GHz
FieldFox Combo 30 kHz to 14 GHz (VNA mode) -3.5 dBm Harmonics: Not available Description FieldFox Combination Analyzers, Technical Overview FieldFox Comparison Summary FieldFox is equipped to handle routine maintenance, in-depth troubleshooting and anything in between. FieldFox delivers Agilent-quality measurements – wherever you need to go. Add FieldFox to your kit, and carry precision with you. The microwave combination analyzer's base function is a cable and antenna analyzer and it can be configured to include a spectrum and network analyzer. FieldFox can be ordered with additional capabilities: power meter, independent signal generator, vector voltmeter, interference analyzer, variable DC source, built-in GPS receiver, and remote control using an iPad or iPhone. The following accessories are included with every FieldFox: AC/DC adapter, battery, soft carrying case, LAN cable, Quick Reference Guide and User’s Guide.
N5221A PNA Microwave Network Analyzer
PNA 10 MHz to 13.5 GHz +13 dBm / -19 dBc Highest performance network analyzer that meets your budget The PNA Series is the highest-performing microwave network analyzer in the industry for passive and active device test. You can choose from five frequency models, 13.5, 26.5, 43.5, 50, or 67 GHz, and customize your PNA with just the right level of performance to meet your specific budget and measurement needs. The Agilent PNA is used to test a wide variety of passive and active devices such as filters, duplexers, amplifiers and frequency converters. The high-performance characteristics of the PNA make it an ideal solution for these types of component characterizations as well as millimeter-wave, signal integrity and materials measurements.
N5247A PNA-X Microwave Network Analyzer
PNA-X 10 MHz to 67 GHz +13 dBm / -60 dBc Description World´s widest range of single-connection measurement applications The PNA-X network analyzer is the world´s most integrated and flexible single-connection microwave test engine for measuring active devices such as amplifiers, mixers, and frequency converters. You can choose from five frequency models to meet your specific device test needs: 13.5, 26.5, 43.5, 50, and 67 GHz. The PNA-X provides unrivaled configurability with a built-in second source, combiner, and internal signal-routing switches. Replace racks and stacks Reduce your equipment count by replacing racks and stacks of equipment with the PNA-X. Applications: S-parameters (CW and pulsed) Noise figure Gain compression Intermodulation and harmonic distortion Conversion gain/loss True-differential stimulus Millimeter-wave Nonlinear waveform and X-parameter® characterization Antenna test Choose your application: PNA-L, PNA, and PNA-X Options PNA Firmware, Upgrade and Support "X-parameters" is a registered trademark of Agilent Technologies. The X-parameter format and underlying equations are open and documented. For more information X-Parameters Open Documentation, Trademark Usage & Partnerships
N9926A FieldFox Handheld Microwave Vector Network Analyzer, 14 GHz
FieldFox VNA 30 kHz to 14 GHz -3.5 dBm Harmonics: Not available Description FieldFox Microwave Vector Network Analyzers, Technical Overview FieldFox Comparison Summary FieldFox is equipped to handle routine maintenance, in-depth troubleshooting and anything in between. FieldFox delivers Agilent-quality measurements – wherever you need to go. Add FieldFox to your kit, and carry precision with you. The VNA’s base function is a transmission/reflection analyzer (S11, S21), and it can be configured to include full 2-port S-parameters. FieldFox can be ordered with additional capabilities: cable and antenna analyzer, built-in power meter, vector voltmeter, variable DC source, built-in GPS receiver, and remote control using an iPad or iPhone. The following accessories are included with every FieldFox: AC/DC adapter, battery, soft carrying case, LAN cable, Quick Reference Guide and User’s Guide.
N9936A FieldFox Handheld Microwave Spectrum Analyzer, 14 GHz
FieldFox SA 5 kHz to 14 GHz (SA mode) TG output power: -3.5 dBm Harmonics: Not available FieldFox Microwave Spectrum Analyzers, Technical Overview FieldFox Comparison Summary FieldFox is equipped to handle routine maintenance, in-depth troubleshooting and anything in between. FieldFox delivers Agilent-quality measurements – wherever you need to go. Add FieldFox to your kit, and carry precision with you. The spectrum analyzer’s base function is spectrum analysis, and can be configured to include; full-band tracking generator and preamplifier, interference analyzer, VSWR and reflection measurements, built-in power meter, USB power sensor support, GPS receiver, DC bias voltage source, time gating and remote control capability. The following accessories are included with every FieldFox: AC/DC adapter, battery, soft carrying case, LAN cable, Quick Reference Guide and User’s Guide.
N5231A PNA-L Microwave Network Analyzer
PNA-L 300 kHz to 13.5 GHz +10 dBm / -20 dBc DescriptionAgilents N5231A PNA-L microwave vector network analyzer (VNA) offers design and manufacturing engineers the highest-performance mid-range VNA. PNA-L is the world’s best value for microwave manufacturing with accurate S-parameters at a budget-friendly cost along with future-proof capabilities. The PNA-L family is designed for passive components and simple active device measurements of amplifier and frequency converters.Agilents PNA-L VNAs are available in five frequency models. Three frequency models, start at 300 kHz, with two or four ports available for the 13.5- and 20-GHz models, and two ports available for the 8.5-GHz product. The other two frequency models with two ports, start at 10 MHz, and include the 43.5- and 50-GHz products.The N523xA PNA-L VNA replaces and is 100% compatible with the existing N5230C, which means there is no change to your setup or test codes.Applications
N9917A FieldFox Handheld Microwave Combination Analyzer, 18 GHz
FieldFox Combo 30 kHz to 18 GHz (VNA mode) -3.5 dBm Harmonics: Not available Description FieldFox Combination Analyzers, Technical Overview FieldFox Comparison Summary FieldFox is equipped to handle routine maintenance, in-depth troubleshooting and anything in between. FieldFox delivers Agilent-quality measurements – wherever you need to go. Add FieldFox to your kit, and carry precision with you. The microwave combination analyzers base function is a cable and antenna analyzer and it can be configured to include a spectrum and network analyzer. FieldFox can be ordered with additional capabilities: power meter, independent signal generator, vector voltmeter, interference analyzer, variable DC source, built-in GPS receiver, and remote control using an iPad or iPhone. The following accessories are included with every FieldFox: AC/DC adapter, battery, soft carrying case, LAN cable, Quick Reference Guide and User’s Guide.
N9927A FieldFox Handheld Microwave Vector Network Analyzer, 18 GHz
FieldFox VNA 30 kHz to 18 GHz -3.5 dBm Harmonics: Not available FieldFox Microwave Vector Network Analyzers, Technical Overview FieldFox Comparison Summary FieldFox is equipped to handle routine maintenance, in-depth troubleshooting and anything in between. FieldFox delivers Agilent-quality measurements – wherever you need to go. Add FieldFox to your kit, and carry precision with you. The VNA’s base function is a transmission/reflection analyzer (S11, S21), and it can be configured to include full 2-port S-parameters. FieldFox can be ordered with additional capabilities: cable and antenna analyzer, built-in power meter, vector voltmeter, variable DC source, built-in GPS receiver, and remote control using an iPad or iPhone. The following accessories are included with every FieldFox: AC/DC adapter, battery, soft carrying case, LAN cable, Quick Reference Guide and User’s Guide.
N5239A PNA-L Microwave Network Analyzer
PNA-L 300 kHz to 8.5 GHz +13 dBm / -20 dBc Agilents N5239A PNA-L microwave vector network analyzer (VNA) offers design and manufacturing engineers the highest-performance mid-range VNA. PNA-L is the world’s best value for microwave manufacturing with accurate S-parameters at a budget-friendly cost along with future-proof capabilities. The PNA-L family is designed for passive components and simple active device measurements of amplifier and frequency converters. Agilents PNA-L VNAs are available in five frequency models. Three frequency models, start at 300 kHz, with two or four ports available for the 13.5- and 20-GHz models, and two ports available for the 8.5-GHz product. The other two frequency models with two ports, start at 10 MHz, and include the 43.5- and 50-GHz products. The N523xA PNA-L VNA replaces and is 100% compatible with the existing N5230C, which means there is no change to your setup or test codes.
N9937A FieldFox Handheld Microwave Spectrum Analyzer, 18 GHz
FieldFox SA 5 kHz to 18 GHz (SA mode) TG output power: -3.5 dBm Harmonics: Not available FieldFox is equipped to handle routine maintenance, in-depth troubleshooting and anything in between. FieldFox delivers Agilent-quality measurements – wherever you need to go. Add FieldFox to your kit, and carry precision with you. The spectrum analyzer’s base function is spectrum analysis, and can be configured to include; full-band tracking generator and preamplifier, interference analyzer, VSWR and reflection measurements, built-in power meter, USB power sensor support, GPS receiver and DC bias voltage source. FieldFox is equipped to handle routine maintenance, in-depth troubleshooting and anything in between. FieldFox delivers Agilent-quality measurements – wherever you need to go. Add FieldFox to your kit, and carry precision with you. The spectrum analyzer’s base function is spectrum analysis, and can be configured to include; full-band tracking generator and preamplifier, interference analyzer, VSWR and reflection measurements, built-in power meter, USB power sensor support, GPS receiver and DC bias voltage source.
N5241A PNA-X Microwave Network Analyzer
PNA-X 10 MHz to 13.5 GHz +13 dBm / -60 dBc Worlds widest range of single-connection measurement applications The PNA-X network analyzer is the worlds most integrated and flexible single-connection microwave test engine for measuring active devices such as amplifiers, mixers, and frequency converters. You can choose from five frequency models to meet your specific device test needs: 13.5, 26.5, 43.5, 50, and 67 GHz. The PNA-X provides unrivaled configurability with a built-in second source, combiner, and internal signal-routing switches. Replace racks and stacks Reduce your equipment count by replacing racks and stacks of equipment with the PNA-X. Applications: S-parameters (CW and pulsed) Noise figure Gain compression Intermodulation and harmonic distortion Conversion gain/loss True-differential stimulus Millimeter-wave Nonlinear waveform and X-parameter® characterization Antenna test
N5251A Millimeter-Wave Network Analyzer
PNA Mmwave System 10 MHz to 110 GHz, extendable to 1.11 THz +13 dBm* / Not applicable Key Features & Specifications Frequency range: 10 MHz to 110 GHz 2- or 4-Port configurations Built in Kelvin bias tee on combiners which brings the bias signal close to the device being measured Full power control over the entire frequency range going down to as low as -50 dBm Supports true differential measurements across the frequency range Support for scalar mixer measurements Integrated pulse measurement capability Support the power spectral measurements Description
N5264A PNA-X Measurement Receiver for Antenna Test
PNA-X Measurement Receiver 2.5 MHz to 1.05 THz Not applicable / Not applicable Visit: Antenna Test and RF Subsystems home page The PNA-X Measurement Receiver sets a new industry standard for antenna test with 400,000 point per second data acquisition on all five measurement channels. Twice as many receivers available compared to any other antenna receiver on the market. The PNA-X antenna receiver is compatible with the MXG or PSG signal sources as well as the existing 85309A distributed frequency converter and the 85320A/B mixers. The receiver with an MXG source can completely replace the 8530A and 8360 sources for existing antenna ranges and typically results in a system speed improvement that is 10 times faster. Additionally, the built-in 8510/8530A code emulation software provides a drop-in replacement for existing antenna ranges utilizing an 8530A. This dedicated receiver is an ideal solution for antenna test engineers working on radar or satellite communications in the aerospace and wireless industries – where large volumes of data are required to fully characterize complex antenna arrays. It is supported by major antenna system integrators such as Orbit/FR-Satimo, Nearfield Systems Inc., and the System Planning Corporation. Agilent Channel Partners – Helping You with Your Antenna Test Needs
N9912A FieldFox Handheld RF Combination Analyzer, 4 and 6 GHz
FieldFox Combo 2 MHz to 4, 6 GHz (VNA mode) +6 dBm at 6 GHz Harmonics: Not available View FieldFox Customer Support Home View FieldFox RF Analyzer N9912A Technical Overview View FieldFox Comparison Summary FieldFox RF analyzers are designed to withstand your toughest working conditions. To accelerate your work, each operating mode has a task-driven user interface that saves time in the field. Step up to FieldFox – and boost your readiness. The N9912A’s base function is a cable and antenna analyzer and it can be configured to include a spectrum and transmission/reflection 1-port vector, 2-port scalar network analyzer. FieldFox can be ordered with additional capabilities: power meter, independent signal generator and interference analyzer. The following accessories are included with every FieldFox: AC/DC adapter, battery, soft carrying case, LAN cable, Quick Reference Guide and User’s Guide. In addition, Agilent Technologies offers a standard 3-year warranty on all RF and microwave FieldFox analyzers. Please note that for a short time, online Quotes will reflect a charge for the 3-year warranty. This charge will be waived when an order is placed.