Products - Sinetec Technologies
Megger -Battery testing equipment
Product Description
TORKEL 840/860
TORKEL® 840 UTILITY is used for battery systems ranging from 12 to 250 V often encountered in switchgear and similar equipment. Discharging can take place at up to 110 A, and if higher current is needed, two or more TORKEL 840 units, or extra load units (TXL), can be linked together. Tests can be conducted at constant current, constant power, constant resistance or in accordance with a pre-selected load profile. TORKEL 860 MULTI is designed primarily for people who travel from place to place to maintain battery systems having different voltages. It features excellent discharging capacity plus a broad voltage range and outstanding portability a unique combination.
TORKEL 820
Combines efficiency with portability Discharge 24 and 48 V batteries at a current of 270 A 12 V batteries at 135 A Two or more TORKEL 820 units and/or extra load units TXL, can be linked together if you need higher current. Discharging proceeds at constant current, constant power or constant resistance, or in accordance with a pre-selected load profile.
BVM, BVM300 and BVM600
Automates battery voltage measurement during capacity tests Daisy-chain design allows expandability up to 120 units High accuracy and stability for precise data collection Integrates with TORKEL Win and PowerDB Test Data Management software▪ Wide voltage rang Easy set-upThe Megger BVM is a battery voltage measurement device that is used for the capacity testing of large, industrial battery banks commonly found in electrical power sub-stations, telecom facilities and computer data center UPS systems. When used in conjunction with a load device, such as the TORKEL unit, and test data management software, such as PowerDB and TORKEL Win, the BVM enables the user to perform a completely automated battery bank capacity test, according to IEC test method. The test also meet NERC/FERC requirements. The BVM is designed in modular form where one BVM device is used for each battery or jar in the string to be tested. One BVM for each battery connects to the next in a daisy-chain fashion, thereby providing easy and economical expandability to meet the testing requirements for small-to-large battery bank systems.
TXL830/850/870/890
Provide higher load currents for concurrent power tests Discharging process controlled by a TORKEL unit Connect directly to the battery under testThey are designed for use together with TORKEL battery load units. Their purpose is to provide higher load currents for use in constant current or constant power tests. Together, TORKEL and the TXL extra loads form a system that can discharge batteries with currents of up to several kA. TXL extra loads are connected directly to the battery, and TORKEL measures the total current using a clamp-on ammeter.
BITE3
The Megger BITE3 Battery Impedance Test Equipment determines the health of lead-acid cells up to 2000 Ah by taking measurements of the most important battery parameters. The BITE3 measures cell impedance, an internal ohmic test, cell voltage, intercell connection resistance and ripple current. And, for the first time in a battery instrument, the BITE3 measures float current and the harmonic content of the ripple current. There is even a built-in spectrum analyzer to show the harmonic content of the ripple current. It has firmware that can be upgraded through the Internet and supports multiple languages.The BITE3 is one of the easiest instruments to use. Its measurements, along with temperature, specific gravity and other battery data, can provide the best basis for evaluating the overall health of batteries from terminal plate to terminal plate and to a lesser extent, the charger (from ripple current and its harmonic content.) Megger recommends that the BITE3 be made part of a comprehensive battery maintenance program with readings taken and recorded semi-annually for flooded, lead-acid cells and quarterly for VRLA.
BITE Accessories
Enhances the Capabilities of the BITE line Full Line of Accessories Designed for Unique Situations Great for Non-standard InstallationsMegger offers a complete line of accessories to enhance the capabilities of the BITE product line. Many are shown in the Data Sheet link above, but there are many others including extension cables, calibration shunts, etc. Even though we have many accessories, we are continually evaluating additional products as interest arises.
BITE Receiver
Used with the original BITEProvides data storage capabilitiesMeasures impedance and dc voltage for lead-acid and nickel-cadmium cellsThe BITE Receiver is a direct replacement for the standard receiver supplied with the original BITE. It provides data storage capabilities without having to replace the BITE transmitter. The receiver incorporates the potential leads, clamp-on current sensor, and data storage capabilities in one unit. The unit stores more than 2000 sets of data (cell impedance, cell voltage and interconnecting strap resistance).
BGFT
Ground faults in ungrounded dc battery systems easily located Operates in high electrical noise environment Simplifies fault tracing by identifying fault characteristic (resistive and capacitive) magnitudes The Battery Ground-Fault Tracer is an economical, manually-balanced instrument that identifies, tracks and locates ground faults in ungrounded dc battery systems - on-line. It is particularly effective in a high electrical noise environments, as the strength of the test current can be adjusted.
ProActiv
Organizes and manages battery data Performs trending analysis Assists the user to manage multiple batteries Prints basic reports The first of its kind, ProActiv is a powerful, easy to use battery database management software designed to analyze each individual battery in a battery system.
ProActiv
Organizes and manages battery data Performs trending analysis Assists the user to manage multiple batteries Prints basic reports The first of its kind, ProActiv is a powerful, easy to use battery database management software designed to analyze each individual battery in a battery system.